VCC表示连接到三极管集电极（C）的电源。
VEE表示连接到三极管发射极（E）的电源。

VDD表示连接到场效应管的漏极（D）的电源。
VSS表示连接到场效应管的源极（S）的电源。

通常VCC和VDD为电源正，而VEE和VSS为电源负或者地。

Vcc, Vdd, Vss, etc.

These notations are used in describing voltages at various common power supply terminals (at these points, only a wire lead exists between the point and a power source) of a given circuit. It turns out that these common voltage terms map to transistor technology as follows:

BJT FET "Vxx" meaning
Vcc Vdd Positive supply voltage
Vee Vss Negative supply, ground

Apparently this terminology originated in some way from the terminals of each type of transistor, and their common connections in logic circuits (i.e., Vcc is often applied to BJT collectors, Vee to BJT emitters, Vdd to FET drains, and Vss to FET sources). This notation then carries across to integrated circuits -- TTL ICs were originally based on BJT technology, and so often use the Vcc / Vee terminology; CMOS ICs are based on FET technology, and so often use the Vdd / Vss terminology.

The absolute distinctions between these common supply terms has since been blurred by the interchangeable application of TTL and CMOS logic families. Most CMOS (74HC / AC, etc.) IC data sheets now use Vcc and Gnd to designate the positive and negative supply pins.

原创文章如转载，请注明,转载自: 轻松数控网 [http://www.cnctechnet.com/]
本文链接地址：http://www.cnctechnet.com/post/1555.html